|
Because of the many different types of adhesives available,
the correct applicator is critical to worker safety and production
speed. Below are some examples of some manual adhesive dispensing
equipment. For more specific information, contact
the sales office nearest you. |
|
 |
Material is put directly into the
syring and discharged by air-pressure. This versatile dispenser
can discharge a very small amount of material very accurately,
or it can be used for continuous flow. |
|
Dimesnsions |
192 x 138 x 67 (mm) |
|
Weight |
2.3 kg |
|
Power |
240 VAC |
|
Air Source |
0.4~0.5 MPa max. |
|
 |
 |
This system is ideal for applying
anaerobic threadlocker or sealant to bolts, screws and pipes.
It's small size and light weight make it easy to incorporate
into any process. |
|
Dimesnsions |
130 x 80 x 90 (mm) |
|
Weight |
0.5 kg |
|
Power |
240 VAC |
|
Air Source |
None |
|
 |
 |
This tube-pump dispenser discharges
small amounts of low viscosity materials of 1000cp or less at
a very constant rate. It is excellent for use with instant adhesives. |
|
Dimesnsions |
200 x 80 x 90 (mm) |
|
Weight |
3 kg |
|
Power |
240 VAC |
|
Air Source |
None |
|
 |
 |
This dispenser forces material by
air pressure. A pinch valve controls material discharge. This
can be used with UV material by using our tube covers to block
off UV light. |
|
Dimesnsions |
400 x 250 x 220 (mm) |
|
Weight |
7 kg |
|
Power |
240 VAC |
|
Air Source |
0.4~0.5 MPa max. |
|
 |
 |
This is used to apply high viscosity
material from a pail. The high-pressure pump forces materail
and a trigger gun discharges it. The wiper plate system makes
material changing easy. Continous discharge is possible with
the double acting shaft. |
|
Dimesnsions |
370 x 665 x 1500 (mm) |
|
Weight |
70 kg |
|
Power |
240 VAC |
|
Air Source |
0.4~0.6 MPa |
|
 |
